Attach side entrance door and its frame made of plastic

Attach side entrance door and its frame made of plastic


Build a side entrance door in your house.

Remove the old side entrance door and measured

To install a new side entrance door made of plastic, you must remove the old wooden door first time. This has the advantage that you can then measure the frame as well and get the correct plastic door and its frame easily.

  1. Commercial door frame associated with expanding foam and a couple of frame screws with the abutting wall sides. So if you want to remove the old side entrance door, you should first of all lift the door off the hinges and then solve the frame screws.
  2. When this is done, the door frame depends only on expanding foam. When you pull on the door frame, you should selfsame actually can completely remove it. Next, measure from the inside dimensions of the old door frame and get the new side entrance door made of plastic and its frame at the hardware store you can trust.
  3. Once you have everything on site, you must remove the old foam insulation from the door opening. For this purpose, you should use a large spatula or flat chisel.

Insert the new plastic part

  1. Now imagine the first time under the new side entrance door made of plastic in the door recess and wedge selbige with small wedges. Align the door frame properly and measure according to the water level to make sure the frame is straight.
  2. If so, drill through the predrilled holes in the frame concrete walls and thus bring the holes for the frame anchor to.
  3. Then the dowel holes and then screw the door frame. The small gaps between the frame and walls made of foam with foam insulation you now.
  4. Thereafter, the foam insulation should dry out a day before you can remove the wedges and the new side entrance door can be hung from plastic.

Turn the frame screws with a lot of feeling.

© 2018 Fondations.net. All rights reserved.
webmaster#fondations.net | 11 q. 0.006 s. | Contact | Privacy | DMCA | TOS