DIY Tips: A roof for the garden pavilion succeed as

DIY Tips: A roof for the garden pavilion succeed as


Install the roof for a garden pavilion. © Dieter_Schütz / Pixelio

Some tips from home improvement

A roof for a garden gazebo is applied in most cases smaller rooftops. There are battens beaten on the ridge and then on the roof is put on. There are various types of roofs in which there are observed some. Below are a few tips that might be a handyman useful.

  • The first possibility for a garden pavilion roof's flat roof. For a flat roof of the yourselfer can easily work with a large thick chipboard, which is simply placed on the support beams and bolted angles.
  • One of the many tips could be here all coatings such as roofing and sheet metal, which may be still attached to the particle board should be mounted on the floor.
  • Then you should make before attaching the flat roof that your roof has a small slope. To this end, let one side of the support beams on which your roof then rests slightly shorter.
  • One of the more important tips might be for the handyman also that you installed a gutter at the edge of the garden pavilion roof.

Building the roof around

  • For a round roof, which is built on a garden pavilion, there are also many tips that can make use of it-yourselfer. For example, you can install as additional moisture protection between battens and Außenlattung film. In addition, all wood used should be impregnated.
  • In the good tips for attaching the roof battens and Außenlattung could a hot, use a nail shooting device. With a nail shooting device saves you certainly some crooked nails and you should get a big time advantage over the normal driving nails with such a shooting mechanism.
  • Another Last of many tips for home improvement might be, you can be a lot of time in mounting a roof on your gazebo.

If you are setting up your roof, it is best to work in pairs.

© 2018 Fondations.net. All rights reserved.
webmaster#fondations.net | 11 q. 0.048 s. | Contact | Privacy | DMCA | TOS