Use a hole saw for wood properly

Use a hole saw for wood properly


Larger holes must be cut.

The hole saw is unrivaled in many woodwork

It does not matter with what kind of wood you want to dress up the walls of your apartment, you are in this case can not refrain from using a hole saw without further notice. Of course, any skilled handyman cut with a jigsaw, a halfway passable hole in a wooden board, because if he does not necessarily want to be quickly finished his work or needs. The quickest and cleanest way, a hole whose diameter exceeds about an ordinary wood bit to get into, for example, wall paneling, is to use a hole saw. In some cases it is even possible yet to edit already built-up boards on the wall.

  1. The hole saw is used for introducing holes of a larger caliber, z. B. Wood Cladding for the implementation of tubes. It consists of 3 parts, strictly speaking, and is ready for use only in conjunction with a drill. Although one might suspect that the term "hole saw" a stand-alone unit, it is basically to drill accessories in this woodworking tool.
  2. The shaft (part 1). By introducing into the chuck to the connecting part between Holzlochsäge and the drive shaft of the drill The tool holder fixed to the shaft offers the possibility of required centering (part 2) and the respective blades attach (Part 3).
  3. Tension in the holder provided in the center of the tool holder in and then attach the blade, usually by means of a bayonet lock on. The center drill It may here, depending on the model, there are other mounting options, you will see, therefore, if you recognize deviations necessarily in the manufacturer's instructions after your hole saw.
  4. After you have assembled from the individual components of the hole saw, you can be clamped in the chuck and they perform their task of drilling a hole in wood. Added you as you are used to from a normal use of the drill, the drill in the middle of the machined body and make sure before you start the hole saw, that you are really set the right, the saw teeth corresponding direction have.
  5. Once the wood saw blade brings to no resistance, pull back your tool and switch off the machine, the desired hole is now created and waiting for his other responsibilities.
© 2017 Fondations.net. All rights reserved.
webmaster#fondations.net | 11 q. 0.007 s. | Contact | Privacy | DMCA | TOS